| Approvals |
|
|
| |
NHTSA |
Listed on the Conforming Products List for Evidential Breath Measurement Devices. |
| Analytical System |
|
|
| |
Electrochemical Sensor (Fuel Cell) |
Select sensor, manufactured to Intoximeters exacting specifications for accuracy, repeatability and long life. |
|
Dual Wavelength Infrared Analyzer |
Two wavelengths are used to track ethanol and carbon dioxide signatures of the provided sample. |
| Measurement Range |
|
|
| |
0.000 to 0.440 g/210L |
The off the shelf instrument is designed to offer a range of results that our customers commonly encounter when performing breath alcohol testing. Custom ranges, and results reported in a most units of measure are available upon request. |
| Accuracy and Precision |
|
|
| |
Highly accurate and precise evidential grade results |
Intoximeters fuel cell based instruments set the industry standard for accuracy and precision. These precise and linear devices offer consistent output that results in evidentiary grade analysis. |
| Sensor Selectivity |
|
|
| |
Highly specific for alcohol |
Fuel Cell sensors are sought after for their specificity to alcohol. |
| Sampling Method |
|
|
| |
Flow, Volume, Breath Drop |
Instruments running the standard software require a consistent flow, a minimum volume and then a drop in flow before sampling a deep lung breath. Alternate sample capture algorithms are available in customized programs. |
| Testing Environment |
|
|
| |
Instrument Temperature |
The temperature of the instrument is self regulated and monitored. If the temperature is determined to be outside of proper analysis limits, testing will be suspended until conditions are optimal. |
| |
Ambient Temperature |
As long as the instrument is at temperature, the instrument can be used. In environments where temperatures are between 0 and 50 degrees C the off-the-shelf instrument will be able to maintain its required temperature to perform tests. Broader temperature ranges can be met with optional hardware. |
| |
Humidity |
10% to 100% relative humidity (The instrument is not designed to be used under water.) |
| |
Ambient Pressure |
600 mbar to 1400 mbar; 450 mmHg [0 °C] to 1050 in mmHg [0 °C] |
| Mouthpiece |
|
|
| |
Style |
One-way check valve mouthpiece |
|
Installation |
The instrument's breath tube is designed to accept several Intoximeters-produced mouthpieces. These mouthpieces have been tested and have shown to operate properly with this instrumentation. Because imporperly designed mouthpieces can affect the instrument's accuracy, we would suggest only using Intoximeters, Inc. mouthpieces. |
| Data Input |
|
|
| |
Keyboard |
Standard - PS2 QWERTY mini keyboard. Full size PS2 or USB keyboards available. AZERTY and other keyboard configurations available with custom software. |
|
Magnetic Stripe |
Optional peripheral 2 or 3 track reader is supported by custom software |
|
Barcode |
Optional peripheral 2D PDF 417 barcode reader is available with custom software |
|
SmartCard |
Optional peripheral SmartCard reader is available with custom software |
|
GPS |
Optional peripheral GPS reader is available with custom software |
| Visual Output |
|
|
| |
Instrument Display |
Two line, high visibility Vacuum Fluorescent Display |
| Audio Output |
|
|
| |
Beeper |
Audible tone to support graphical messaging system |
| Data Output |
|
|
| |
Printer |
Internal thermal printer or capable of interfacing with optional serial, parallel or USB printers |
|
Serial |
Up to 2 serial ports on board. Optional software available to allow upload of test records. |
|
Parallel |
One parallel port on board |
|
Modem |
On board modem optional |
|
USB |
With the optional add on USB/Ethernet Enhancement Module, the Intox EC/IR II is capable of supporting seven USB host ports and one Ethernet port |
|
Ethernet |
The optional add on USB/Ethernet Enhancement Module offers this functionality. Optional, off-the-shelf periperal serial to Ethernet adapters can provide Ethernet functionality without the cost of the USB connectivity. |
| Data Storage |
|
|
| |
Number of Tests |
More than 4,000 test memory for a test record with an average set of operator, subject and incident data entry attached |
|
Waveform Storage |
Capable of storage of sensor waveform data available in custom software |
| Power Options |
|
|
| |
Power |
110V AC 220V AC 12 V DC |
| Case Construction |
|
|
| |
Aluminum Sheet |
Rugged casing protects instrument and internal components |
| Size, Shape and Weight |
|
|
| |
Dimensions |
7.125” x 18.75” x 14.5” |
| |
Weight |
15.5 lbs (7,030 grams) |
| Measurement Types |
|
|
| |
Automatic Direct Breath |
Auto sampling of subjects deep lung breath samples. |
| |
Manual Direct Breath |
Manual sampling option for subjects who cannot meet the minimum flow and volume requirements of the instrument. |
| Security |
|
|
| |
Password |
Configurable software allows password protection as an option |
| Options |
|
|
| |
Barometer |
An optional on board barometer simplifies the use of dry gas standards |
|
Dry Gas Pressure Sensor |
An optional tank pressure sensor allows the operator to check the remaining pressure in an attached dry gas standard |
|
USB Host |
An optional Enhancement Module provides multi port USB host connectivity |
|
Ethernet |
Optional off-the-shelf serial to Ethernet adapters offer Ethernet connectivity. The optional Enhancement Module offers Ethernet connectivity with USB host connectivity. Optionally, the Intox EC/IR II offers software that transmits encrypted data and thus provides security when sending test records over the public internet. |
|
2D Barcode Reader |
Serial or USB interface to periperal three-track 2D barcode reader (PDF417) is available |
|
Magnetic Stripe Reader |
Serial or USB interface to peripheral three-track magnetic card reader is available |
|
Desktop Printer |
The Intox EC/IR II is compatible with a variety of serial or USB laser printers |
|
Software |
Capable of interfacing with IntoxNet for test data download and remote control operations |
| |
|
|